HPE SN2010M 10 / 25 / 100Gigabit 18x SFP28 10/25GbE 4x QSFP28 100GbE Ethernet Network Switch

Hersteller / OEM: Mellanox HP

Gerätetyp: Ethernet

Bauart: 19" 2 HE

Modell: SN2010M

PartNr: P05769-001

Ports: 24 Port 100Gb SFP+

Specs: HPE StoreFabric SN2010M – Technical Specifications
Interfaces

18 × 1/10/25GbE SFP28 ports

4 × 40/100GbE QSFP28 ports

QSFP28 breakout support, depending on transceiver, cable and configuration

1 × 10/100/1000Base-T RJ45 management port

1 × serial console port

1 × USB port
Switching

Layer 2 / Layer 3 managed switch

Store-and-forward and cut-through switching modes

Jumbo frames up to 9,216 bytes

Support for 1/10/25/40/50/56/100GbE, depending on port type, transceiver and software configuration
Layer 2 Feature Set

Multi-Chassis Link Aggregation – MLAG

IEEE 802.1Q VLAN

VLAN stacking / QinQ

IGMP v2/v3 snooping

IGMP querier

IEEE 802.1w Rapid Spanning Tree Protocol – RSTP

IEEE 802.1s Multiple Spanning Tree Protocol – MSTP

Rapid Per-VLAN Spanning Tree – RPVST / RPVST+

BPDU filter

BPDU guard

Root guard

Loop guard

IEEE 802.3ad Link Aggregation – LAG

Link Aggregation Control Protocol – LACP

Up to 32 ports per link aggregation group, depending on software version

Up to 64 link aggregation groups, depending on software version

Port isolation

IEEE 802.1AB Link Layer Discovery Protocol – LLDP

Layer 2 multicast handling

Storm control

Port mirroring

SPAN and RSPAN
Layer 3 Feature Set

IPv4 and IPv6 routing

Static routing

Router ports

Switched Virtual Interfaces – SVI / VLAN interfaces

Loopback interfaces

Null interface

Virtual Routing and Forwarding – VRF

VRF quantity depends on the installed NOS and firmware version

Border Gateway Protocol – BGP4 / BGP4+

Open Shortest Path First – OSPFv2

IPv6 routing functionality depending on software version

Route maps

Prefix lists

Bidirectional Forwarding Detection – BFD

BFD support for BGP, OSPF and static routes

Virtual Router Redundancy Protocol – VRRP

Multi-Active Gateway Protocol – MAGP

DHCPv4 relay

DHCPv6 relay

Equal-Cost Multi-Path routing – ECMP

ECMP scale depends on the installed NOS and firmware version

Multicast routing

IGMP v2/v3

PIM-DM

PIM-BIDIR

Bootstrap Router – BSR support
PIM-SM and PIM-SSM should not be specified without verifying the installed firmware and NOS. HPE documentation for this platform does not consistently confirm PIM-SM support.
Synchronization

IEEE 1588 Precision Time Protocol – PTP

SMPTE-related PTP profiles depending on software version

Network Time Protocol – NTP
Quality of Service and Data Center Bridging

IEEE 802.3x flow control

Weighted Random Early Detection – WRED

Explicit Congestion Notification – ECN

Priority Flow Control – PFC

IEEE 802.1Qbb Priority Flow Control

IEEE 802.1Qaz Enhanced Transmission Selection – ETS

Data Center Bridging Exchange – DCBX

Application Priority TLV support

Traffic classification

Traffic policing

Packet marking and rewrite

Advanced QoS policies

Shared buffer architecture

Dynamic buffer management

Queue monitoring
Management and Automation

Command Line Interface – CLI

Web-based management interface

JSON and XML management interfaces, depending on firmware

Zero-Touch Provisioning – ZTP

Ansible integration

Puppet integration

SaltStack integration, depending on software version

FTP

TFTP

SCP

SSHv2

Telnet

SNMP v1, v2c and v3

Syslog

In-band management

Out-of-band management

DHCP client

AAA authentication

RADIUS

TACACS+

LDAP

Dual software image support

Event history

Configuration rollback and software image management, depending on firmware
Network Virtualization

VXLAN hardware offload

Hardware VXLAN Tunnel Endpoint – VTEP

Layer 2 VXLAN gateway

Layer 2 network extension

VXLAN-based network virtualization
BGP EVPN support depends on the installed operating system and firmware version. VMware NSX and OpenStack integration should only be specified after checking the concrete NOS and software release.
Monitoring and Telemetry

sFlow

Port mirroring

SPAN

RSPAN

Real-time queue depth monitoring

Queue depth histograms and thresholds

Enhanced link monitoring

PHY monitoring

Bit Error Rate degradation monitoring

Interface health monitoring

System health monitoring

Event and fault history

Third-party monitoring integration

Integration with platforms such as Splunk, depending on configuration
NVIDIA/Mellanox What Just Happened – WJH – may be available depending on the installed NOS and firmware version.
Notes
Feature availability depends on:

installed HPE, Mellanox or NVIDIA network operating system

firmware and software version

active licenses

transceiver and breakout configuration

OEM-specific restrictions
The hardware platform corresponds to the Mellanox/NVIDIA Spectrum-based SN2010 switch family. Firmware, licensing, support and available software features may differ between the HPE StoreFabric SN2010M and open Ethernet variants.

Nettogewicht: 3 kg

Rackeinbautiefe: 53 cm

Artikelabmessung: L: 53 cm | B: 20 cm | H: 4,5 cm