HPE SN2010M 18x SFP28 10/25GbE 4x QSFP28 40/100GbE Ethernet Network Switch 19" 1U half-width

Hersteller / OEM: Mellanox HP

Gerätetyp: Ethernet

Bauart: 19" 1 HE

Modell: SN2010M

PartNr: P05769-001

Ports: 22 Port 10Gb + 40Gb + 100GbGb SFP+ QSFP28

Specs: HPE StoreFabric SN2010M – Technical Specifications

19" 1U half-width
Airflow: Port Side Out / Exhaust / rear-to-front / Power-to-port

18 × 1/10/25GbE SFP28 ports
4 × 40/100GbE QSFP28 ports
QSFP28 breakout support, depending on transceiver, cable and configuration
1 × 10/100/1000Base-T RJ45 management port
1 × serial console port
1 × USB port
Switching
Layer 2 / Layer 3 managed switch
Store-and-forward and cut-through switching modes
Jumbo frames up to 9,216 bytes
Support for 1/10/25/40/50/56/100GbE, depending on port type, transceiver and software configuration
Layer 2 Feature Set
Multi-Chassis Link Aggregation – MLAG
IEEE 802.1Q VLAN
VLAN stacking / QinQ
IGMP v2/v3 snooping
IGMP querier
IEEE 802.1w Rapid Spanning Tree Protocol – RSTP
IEEE 802.1s Multiple Spanning Tree Protocol – MSTP
Rapid Per-VLAN Spanning Tree – RPVST / RPVST+
BPDU filter
BPDU guard
Root guard
Loop guard
IEEE 802.3ad Link Aggregation – LAG
Link Aggregation Control Protocol – LACP
Up to 32 ports per link aggregation group, depending on software version
Up to 64 link aggregation groups, depending on software version
Port isolation
IEEE 802.1AB Link Layer Discovery Protocol – LLDP
Layer 2 multicast handling
Storm control
Port mirroring
SPAN and RSPAN
Layer 3 Feature Set
IPv4 and IPv6 routing
Static routing
Router ports
Switched Virtual Interfaces – SVI / VLAN interfaces
Loopback interfaces
Null interface
Virtual Routing and Forwarding – VRF
VRF quantity depends on the installed NOS and firmware version
Border Gateway Protocol – BGP4 / BGP4+
Open Shortest Path First – OSPFv2
IPv6 routing functionality depending on software version
Route maps
Prefix lists
Bidirectional Forwarding Detection – BFD
BFD support for BGP, OSPF and static routes
Virtual Router Redundancy Protocol – VRRP
Multi-Active Gateway Protocol – MAGP
DHCPv4 relay
DHCPv6 relay
Equal-Cost Multi-Path routing – ECMP
ECMP scale depends on the installed NOS and firmware version
Multicast routing
IGMP v2/v3
PIM-DM
PIM-BIDIR
Bootstrap Router – BSR support
PIM-SM and PIM-SSM should not be specified without verifying the installed firmware and NOS. HPE documentation for this platform does not consistently confirm PIM-SM support.
Synchronization
IEEE 1588 Precision Time Protocol – PTP
SMPTE-related PTP profiles depending on software version
Network Time Protocol – NTP
Quality of Service and Data Center Bridging
IEEE 802.3x flow control
Weighted Random Early Detection – WRED
Explicit Congestion Notification – ECN
Priority Flow Control – PFC
IEEE 802.1Qbb Priority Flow Control
IEEE 802.1Qaz Enhanced Transmission Selection – ETS
Data Center Bridging Exchange – DCBX
Application Priority TLV support
Traffic classification
Traffic policing
Packet marking and rewrite
Advanced QoS policies
Shared buffer architecture
Dynamic buffer management
Queue monitoring
Management and Automation
Command Line Interface – CLI
Web-based management interface
JSON and XML management interfaces, depending on firmware
Zero-Touch Provisioning – ZTP
Ansible integration
Puppet integration
SaltStack integration, depending on software version
FTP
TFTP
SCP
SSHv2
Telnet
SNMP v1, v2c and v3
Syslog
In-band management
Out-of-band management
DHCP client
AAA authentication
RADIUS
TACACS+
LDAP
Dual software image support
Event history
Configuration rollback and software image management, depending on firmware
Network Virtualization
VXLAN hardware offload
Hardware VXLAN Tunnel Endpoint – VTEP
Layer 2 VXLAN gateway
Layer 2 network extension
VXLAN-based network virtualization
BGP EVPN support depends on the installed operating system and firmware version. VMware NSX and OpenStack integration should only be specified after checking the concrete NOS and software release.
Monitoring and Telemetry
sFlow
Port mirroring
SPAN
RSPAN
Real-time queue depth monitoring
Queue depth histograms and thresholds
Enhanced link monitoring
PHY monitoring
Bit Error Rate degradation monitoring
Interface health monitoring
System health monitoring
Event and fault history
Third-party monitoring integration
Integration with platforms such as Splunk, depending on configuration
NVIDIA/Mellanox What Just Happened – WJH – may be available depending on the installed NOS and firmware version.
Notes
Feature availability depends on:
installed HPE, Mellanox or NVIDIA network operating system
firmware and software version
active licenses
transceiver and breakout configuration
OEM-specific restrictions
The hardware platform corresponds to the Mellanox/NVIDIA Spectrum-based SN2010 switch family. Firmware, licensing, support and available software features may differ between the HPE StoreFabric SN2010M and open Ethernet variants.

Nettogewicht: 3 kg

Rackeinbautiefe: 53 cm

Artikelabmessung: L: 53 cm | B: 20 cm | H: 4,5 cm